|
|
|
|
|
|
|
|
|
|
LIFE WITH LINUX
Sharing Linux drives with Samba
By Mark Lawson
If you want to be able to see your Linux directories on your PC, then Samba is for you. If you're a Windows person, you can make life easier if you can use Samba to access the disks on the Linux box as if they were on an NT server. Originally developed by Andrew Tridgell at the Australian National University, Samba implements the SMB (Server Message Block) protocol, allowing files and printers on Linux to be shared with clients such as Windows for Workgroups, DOS, OS/2, Windows NT and others.
Simply put, Samba makes a Linux system behave as if it were a Windows NT box. This is very useful if you want to copy IDs or log files on and off your Linux box. It's also useful if you want to configure files using the familiar Notepad from the comfort of your PC or just look around. Here is the five-minute guide to Samba:
Make sure you have TCP/IP and Client for Microsoft Networks configured on your PC.
Make a note of your WorkGroup setting on the Identification tab (in the Windows Network Control Panel). Ours is ELECMEMO.
On your Linux box, login as "root". If you have Domino running don't worry, just press Alt-F2 to get a new terminal (wonderful isn't it? Alt-F1 to Alt-F6 function normally).
Now type "pico /etc/smb.conf" to edit the configuration file. It's quite long and a bit daunting but you only have to change a couple of things.
First, near the top, change the work group setting to match your Windows workgroup (remember, mine was ELECMEMO).
Further down, uncomment the two "encrypt password" and "passwd file" lines.
Towards the bottom modify and uncomment the "fred's private directory example" as shown below. This also shows the other modifications with the rest of the file removed for clarity.
[global]
# workgroup = NT-Domain-Name or Workgroup-Name
workgroup = ELECMEMO
encrypt passwords = yes
smb passwd file = /etc/smbpasswd
# A private directory, usable only by fred. Note that fred requires write
# access to the directory.
[notesdata]
comment = Domino Data
path = /home/notesdata
valid users = notes
public = no
writable = yes
printable = no
|
Save the file with Ctrl-O and exit with Ctrl-X.
Now run "smbpasswd -a notes" and when prompted give the Notes user password.
Stop Samba running with the command "/etc/rc.d/init.d/smb stop". Don't worry if you get "FAILED" messages. This only means it wasn't running.
Restart Samba with "/etc/rc.d/init.d/smb start" You should get two "OK" messages.
[ Next ]
|
|
|
|
|
|
-- Advertisement --
PistolSTAR: the de facto standard for Lotus authentication
PistolStar's Password Power integrates with Microsoft Active Directory to enable single sign-on to Lotus applications and automatic recovery of the Notes ID password via self-service reset of the Active Directory password.
- A single set of credentials to remember - one set of password policies to manage.
- Cost-effective plug-ins integrate smoothly with your environment.
- Proven, ground-breaking technology deployed to millions of users.
Learn more. |
-- Advertisement --
The Ultimate Notes Domino Training Experience - Amsterdam, 11-13 November
Get in-depth technical training that you can put to use on the job right away at THE VIEW's Admin2008 and Lotus Developer2008 Europe! One registration gets you into your choice of over 70 new and updated expert know-how sessions, one-on-one consultations, hands-on labs, and more.
See complete agendas and register by 10 October to save 495 euros! |
|
|
|
|
|
|
|
|
